Blue mail

Postal cyanotype project

Cyanotype is an early photographic printing process, first discovered in 1842 and still used today for blueprints. Your postcard is an in-progress cyanotype print, coated in a safe, non-toxic, light-sensitive chemical solution. This solution reacts with UV light and water to make a blue image.

The postcard will capture a visual record of its time in the mail, based on the light it was exposed to in transit. I need your help washing the print to finish the process.

washing the print

To develop and fix the image, the postcard needs to be rinsed in water. Tap is totally fine.

  1. Fill a flat pan or dish (that you don't use for food) with warm water.
  2. Submerge the card and gently agitate it. You can also place the card flat in a sink and rinse it under gentle pressure from a faucet or sprayer. Don't scrub or spray too hard—the coating could be rinsed off completely.
  3. The postcard will change from a greenish bronze color to pale blue. Rinse until the water runs clear and any white areas have no trace of yellow or green left.
  4. Pat the postcard dry with paper towels so there aren't any puddles—they'll leave spots.
  5. Lay the postcard flat to finish drying. Hanging the card with a magnet also works well if you have one.

The print will darken to a deep blue color over the next 24 hours or so. Once it's fully dry, either send a photo or mail the postcard back.

Contact

PO Box 190642
San Francisco CA 94119

Gmail

Instagram